Skullcandy Crusher Wireless Faltgelenk tauschen

Geschrieben von: Val
  • Kommentare: 11
Skullcandy Crusher Wireless Faltgelenk tauschen

Schwierigkeitsgrad

Mittel

Schritte

5

Zeitaufwand

10 - 20 Minuten

Einleitung

Diese Anleitung zeigt, wie das Faltgelenk im Skullcandy Crusher Wireless Kopfhörer ausgetauscht wird. Du kannst versuchen, das Gelenk online zu kaufen oder aus einem anderen Skullcandy Crusher Wireless auszubauen.

  1. 1iKZxiFHjbLtCeZg
    1iKZxiFHjbLtCeZg
    MJXMY4xZMZMOBjER
    aQJ623EBCwPsxUXx

    • Fahre den Kopfhörerbügel auf der Seite, die ersetzt werden soll, aus, und klappe diesen ein.

  2. XNaRdPv1ArsoskYp
    XNaRdPv1ArsoskYp
    BTNKgYCksxbGUhJU
    PVhVDjdeWK4RFHqt

    • Entferne zwei 14mm Torx T6-Schrauben an der eingeklappten Stelle des Bügels.

    Any idea where to find these specific screws online? Have been searching EVERYWHERE 😬

    Tessa Verstraete -

  3. vHvrsWRgHxsUI4mM
    vHvrsWRgHxsUI4mM
    QSIe3YGDnfJKDdg6
    OlnlyCE6gYOCVE2F

    • Ziehe den unteren Teil mit ein wenig Kraft vom Rest des Bügels weg.

  4. PQhDVpaoNPqpdOGr
    PQhDVpaoNPqpdOGr
    NDxxLBqwZDOvGyJ2
    VAhqvZrYeNVEMqOK

    • Entferne zwei 5mm Kreuzschlitzschrauben #1 an der Unterseite des Bügels.

    The screws are surprisingly tight and you don't have much space to work with. Use the correct driver head and work very patiently or you risk stripping the screws and making everything harder for yourself.

    Mariano Trinidad -

  5. Lid2MQaHQZC4tZTx
    Lid2MQaHQZC4tZTx
    tSSMUYHTWEKmvA5Z

    • Entferne das obere Plastikstück des Gelenks am Bügel.

Abschluss

Um dein Gerät wieder zusammenzubauen, folge den Schritten in umgekehrter Reihenfolge.

Tinte & Feder

Val

Mitglied seit: 01/04/22

1178 Reputation

9 Kommentare

Hello. Any idea where can i buy the folding hinge from? thx!

Liviu -

Hi, Like the explanation but can you tell me where to buy tge folding hinge?

Menno de Gier -

I'm 3D printing these here https://www.ebay.co.uk/itm/364153346438

Stronger than original.

Eatfire -

This is my alternative solution, albeit a temporary one. Sharing for people that end up here through search engines.

----

I figured out a temporary fix. I am posting this for others arriving here from search engines and the like. I assume OP's problem has long been solved. My fix is based on somebody else's fix.

I have 3D printed parts on the way, but my 'design' may actually press down on my ears better than the original. 🤔

What you'll need:

-Tie rip 2 mm
-Tie rip 4 mm
-Drill + 1,5 mm drillbit for metal
-Strong thin elastic.

-Pliers (for making sure the tierips are real tight.)

https://guide-images.cdn.ifixit.com/igi/...

Cus7od35 -

Thanks for this guide! It would help to have another step or two… I can replace the hinge now, but how do I get the old hinge off? The half surrounding the wire, I mean? The last photo shows it tucked away but still attached. Any suggestions?

DrP -

Never mind. Answered my own question. The Etsy seller who provided a 3D printed hinge also included instructions that specified to break the old hinge. I wasn’t strong enough but my husband did it for me.

DrP -

This guide doesn't include a way to take off the hinge half that hangs off the cable, but we figured out a way. You just use pliers to bend it. This will obviously break that half so you can't reuse it but you should have replacement parts already.

Mariano Trinidad -

Does anyone know where to find the exact screw used for the headphones

Gabriel Olguin -